Skip to main content

Recruitment Status

Notif.
Admit
Ans. Key
Result

ISRO Scientist/Engineer 'SC' (Electronics) - 2026 Selection Panel Result

Indian Space Research Organisation (ISRO) • Result Date: Thu, 15 Oct, 2026

ISRO Scientist/Engineer 'SC' (Electronics) - 2026 Selection Panel Result — Quick Summary

Indian Space Research Organisation (ISRO) has released the Selection Panel, Wait List and Selection Panel for PwBD for Scientist/Engineer 'SC' (Electronics), Post Code BE001, under ICRB 2026. Interviews were held at ISRO Headquarters, Bengaluru, on 05 to 08 October 2026 and 12 to 15 October 2026. The panel is valid up to 12.11.2027 and can be checked as a PDF on isro.gov.in.

Last Updated: 16 Nov 2026

Key Facts at a Glance

Exam Name

ISRO Scientist/Engineer 'SC' (Electronics) - BE001 (ICRB 2026)

Result Date

15 October 2026 (as per our record); check the official PDF for the notice date

Organisation

Indian Space Research Organisation (ISRO)

Result Type

Final Result / Merit List

Panel Types

Selection Panel, Wait List and Selection Panel for PwBD

Interview Dates

05 to 08 October 2026 and 12 to 15 October 2026

Interview Venue

ISRO Headquarters, Bengaluru

Panel Validity

Up to 12.11.2027

Official Website

isro.gov.in

How to Check Your Result

1

Open the official website isro.gov.in in your browser.

2

Go to the ICRB Recruitment page.

3

Find the notice for Scientist/Engineer 'SC' (Electronics) BE001 selection panel.

4

Open or download the Electronics Selection Panel PDF.

5

Press Ctrl+F and search your registration number in the PDF.

6

Note your panel position and the remark against your name.

7

Save or print the PDF for future reference.

What the ISRO Scientist/Engineer 'SC' (Electronics) BE001 Result Means

The Indian Space Research Organisation (ISRO), through the ISRO Centralised Recruitment Board (ICRB) 2026, has released the result for Scientist/Engineer 'SC' (Electronics), Post Code BE001. The result is a Selection Panel, not a marks-based scorecard. It has three parts: the Selection Panel, the Wait List, and the Selection Panel for PwBD candidates. It applies to every candidate who appeared for the interview at ISRO Headquarters, Bengaluru, on 05 to 08 October 2026 or 12 to 15 October 2026.

Our record lists the result date as 15 October 2026. The panel PDF on isro.gov.in sits in a November 2026 folder, so read the date printed on the official notice as the final reference.

How to Check the Result Online

The result is published as a PDF on the ISRO website. You do not need a login or date of birth. You only need your registration number.

  • Open https://www.isro.gov.in/ in your browser.
  • Go to the ICRB Recruitment page at https://www.isro.gov.in/ICRB_Recruitment12.html.
  • Find the notice for the Electronics (BE001) selection panel.
  • Open or download the Electronics Selection Panel PDF.
  • Press Ctrl+F and type your registration number, for example in the 2010xxxx format.
  • Note your panel position and the remark against your name.
  • Save a copy of the PDF for your records.

What Details Appear on the Result Page

The panel lists the following for each candidate:

  • Panel Position: a number for selected candidates, and WL-1 onwards for wait-listed candidates.
  • Regn. No.: your ICRB registration number.
  • Name of the Candidate: as recorded in your application.
  • Remarks: either Selected or Wait-Listed.

According to the published panel, positions 1 to 29 are marked Selected. Wait-listed candidates occupy positions WL-1 to WL-84. WL-1 is Regn. No. 20100434 (Darapu Hari Kamalakar Reddy) and WL-84 is Regn. No. 20100715 (Narapareddy Jayesh Reddy). The PwBD panel marks two candidates as Selected: Regn. No. 20100612 (Dev Das Yadav) and Regn. No. 20100454 (Shashank H Teli). Marks, raw scores and percentile figures are not shown on this panel.

Understanding Your Result: Panel Position, Wait List and Normalization

Many government exams publish a scorecard with raw and normalized marks. Normalization adjusts scores across multiple shifts so that candidates who faced different paper difficulty are compared fairly. The ISRO BE001 result does not work this way. It is an interview-based selection panel, and the source notice shows no raw marks, normalized marks or shift-wise scores. If you want to know how the final merit was calculated, check the official ICRB notification for the selection process and any weightage it gives to each stage.

The difference between the statuses is simple:

  • Selected: your name is in the main panel and you are in line for the offer and the later formalities.
  • Wait-Listed: you are on a reserve list. You may be considered only if a selected candidate does not take up the post and the panel is still valid.
  • Not listed: interviewed candidates whose names do not appear are not short-listed or wait-listed for selection.

Here, the word qualifying does not mean a simple pass mark. Appearing in the interview does not guarantee a place. Your position in the panel depends on merit as decided by ISRO.

Documents Needed for the Next Stage

The source notice does not give a document checklist. Selected candidates should follow the instructions ISRO sends by email or posts on the ICRB page. Keep the following ready in original and photocopy, and compare against the list in the official notification:

  • Printout of your ICRB application and registration number details.
  • Photo identity proof.
  • Date of birth proof.
  • Educational certificates and mark sheets for the qualifying degree.
  • Category, PwBD or other reservation certificates, if you applied under them.
  • Experience or no-objection documents, if the notification asks for them.

Check that the names and dates on every document match your application exactly.

What Happens After the Result

The Electronics selection panel, including the wait list, is valid up to 12.11.2027. The steps that follow are normally these, in order:

  • Verification of documents: ISRO verifies your credentials against the application.
  • Medical examination: candidates must meet the medical standards stated in the official notification.
  • Offer and joining: an appointment offer is issued, and you report on the date and at the centre mentioned in it.
  • Posting: the ISRO centre or unit is assigned by ISRO as per its requirement.

The source does not state the dates or durations for these stages. A realistic timeline therefore runs from interviews in October 2026, to the panel release, to ISRO's communication for verification and medical checks, to the offer and joining, all within the panel validity of 12.11.2027. Wait-listed candidates should keep checking isro.gov.in for further notices.

How Cut-Offs and Selection Are Decided

For a panel like this, ISRO does not publish a single cut-off score on the result page. Selection is generally based on merit in the selection process, the number of vacancies available for the post, and reservation rules. Category-wise positions, such as for PwBD candidates, are filled from separate panels, which is why the PwBD panel is listed separately. The wait list is built to fill vacancies if selected candidates drop out. For the exact weightage and the vacancy distribution for BE001, read the official ICRB notification and the selection process section.

If Your Result Is Not Showing or Has a Discrepancy

  • Name not found: search by registration number and not by name, since spellings can differ. Check that you have the correct PDF for Electronics, BE001, and not another discipline.
  • PDF will not open: try another browser or device, or download the file instead of viewing it online.
  • Spelling error or wrong detail: write to ISRO through the contact details given on the ICRB recruitment page, quoting your registration number, post code BE001 and the correct details. Attach supporting documents.
  • Still no reply: follow up through the same channel and keep a record of every email you send.

Always use only isro.gov.in for updates, and do not trust unofficial messages that ask for payment.

If You Did Not Qualify

If your registration number is absent from both the selection panel and the wait list, you were not short-listed or wait-listed for this post. The notice does not mention any revised result or reconsideration process. If one existed, it would appear on the ICRB page, so check it for updates.

You can still use the experience. Note which areas of the interview felt weak, such as core electronics concepts, project work or communication. Revise those topics before the next ICRB cycle, and watch the ISRO recruitment page for new notifications on Scientist/Engineer posts.

Frequently Asked Questions — ISRO Scientist/Engineer 'SC' (Electronics) - 2026 Selection Panel Result

The result has been declared. Our record lists the result date as 15 October 2026. Interviews were held on 05 to 08 October 2026 and 12 to 15 October 2026. The panel PDF is on isro.gov.in, and the date printed on that notice is the final reference.

Go to isro.gov.in, open the ICRB Recruitment page, and download the Electronics (BE001) Selection Panel PDF. Search your registration number in the file to see your panel position and remark.

You only need your ICRB registration number to find your name in the PDF. No login or date of birth is required. For the later verification stage, keep your identity proof, date of birth proof, educational certificates and category certificates ready, as listed in the official notification.

Selected candidates should wait for ISRO's communication on document verification, medical examination and joining. Wait-listed candidates should keep checking isro.gov.in, since the panel including the wait list is valid up to 12.11.2027.